Part Number Hot Search : 
RGPP15D US6U37 ICS85 TA0452A FM101 IRF14 L2004L5 L2006D5
Product Description
Full Text Search
 

To Download RL0402DU-1224 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  product specifications: 200w ~ 400w ac - dc pfc medical & ite approved power supply rl0402d dual output series features: safety approvals to iec/en/ul60601 - 1 3 rd edition high quality & reliable component usage variable fan speed & low acoustical noise 3.3/ 5/ 12/ 24v dual output optional combinations u - chassis type drive max 250w under air convection active power factor corrected to en61000 - 3 - 2 class d u - chassis & enclosed with built - in fan mechanical options input voltage: 90 ~ 264vac full range, 47 ~ 63hz. input current: 6.35a at 90vac full load. inrush current: 70a max @ 230vac with full load and cold start. power factor correction: 0.98 @ vin: 230vac full load. fan drive: 12vdc/400ma is available to drive an external fan. transient response: returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%. overshoot: turn - on/off not exceed 5% over nominal voltage. efficiency: 752% ~ 85% depends on model. turn on delay : 1 second maximum at 230 vac. hold up time: 20ms min. at 80% of full load. adjustability: output user adjustable +/ - 5% minimum. remote sense (for under 12v models): designated rs+ and rs - on the cn3. remote on - off: designated as rsw on the cn3, requires a low signal to inhibit output. power supply on: green led designated as led 1 on the pcb. led display: bi - color green led in front panel (rl0402de only); any protection occurred or rsw applied low signal will emit orange. power good: pg on cn3 goes high 100 - 500ms after dc regulation and low at least 1ms before loss of regulation (open collector). input circuit protection (primary): two t8a/250v fuses inserted. input voltage protection: power shut down under 80 +/ - 5vac, and recovered over 86vac. over - power protection: 110~140% of i - max and auto - recovery. over - voltage protection: latching down will occur when output voltage exceed 130% and recycle ac input to reset. over temp. protection: protected at ambient 85c; auto - recovery. short circuit protection: trip without damage and auto - recovery. operating temperature: 0 to +70 ambient, de - rating at 2.5% per degree from +50 to +70 . switching frequency: 30khz fixed frequency. storage temperature: - 20 to +85 degrees c. operating humidity: 5% to 90% rh, non - condensing. storage humidity: 5% to 95% rh, non - condensing. vibration: frequency 5 to 50 hz, acceleration +/ - 7.35 m/(sxs) on x,y and z axis. emc: emc: en60601 - 1 - 2/en61204 - 3 class b conducted / radiated; en61000 - 3 - 2,3; iec61000 - 4 - 2, 3, 4, 5, 6, 8, 11. safety: en/ iec/ ul60601 - 1 3 rd edition; en / iec / ul60950 - 1. leakage current: medical degree < 200ua; ite degree < 1.5ma. hi - pot test: 1500 vac between input line and chassis (2ma dc cut off current); 4000vac between primary and secondary windings; primary to core 1500vac. all for 3 sec. grounding test: apply 40 a from ground pin to the earthed connection point. maximum allowable resistance is 0.1ohm. warranty: 2 years. mtbf: 100000 hrs (according to mil - hbk - 217f) at 30 . cooling: :rl0402du series: u - chassis @400w max. with 23cfm airflow or 250w max. under convection cooling. rl0402de series: enclosed with side built - in fan @400w max. burn in: 45 +/ - 5 degree c for 1 hour @230vac with full load. enclosure: rl0402du series: 8(l) x 5(w) x 1.6(h) inches. rl0402de series: 9(l) x 5(w) x 1.6(h) inches. weight: rl0402du series: 1.3kg; rl0402de series: 1.6kg. copy right ultra level tech co., ltd 2015, all right reserved. specifications subject to change without notice. rl0402du series (u - chassis type): 8(l) x 5(w) x 1.6(h) inches. rl0402de series (enclosed type): 9(l) x 5(w) x 1.6(h) inches. cb ultra level tech co., ltd. we supply the power customers need iso9001 www.ultralevel.com.tw tel:+886 - 2 - 29180118 fax:+886 - 2 - 29181465
note: * rl0402dxy series where x = e (enclosed with built - in fan type) or u (u - chassis type), y = 0312, 0324, 0512, 0524 and 1224 . * 10% minimum load is required for all outputs to maintain the ripple and regulation. output is fully isolated. * total combined power of v1 and v2: 400w max. with 22.95 cfm forced air and 250w convection cooling for rl0402du1224; 400w for rl0402de1224 by self - cooling. 300w max. with 22.95 cfm forced air and 200w convection cooling for other rl0402duy; 300w for other rl0402dey by self - cooling. output voltage / current rating chart: measured at output power connector. outline drawing: rl0402du series (u - chassis type): 8 (l) x 5(w) x 1.6(h)inches; weight: 1.3kg model number output voltage max. output current total regulation ripple & noise convection 22.95cfm rl0402dx0312 v1: +3.3v 30a 40a +/ - 5% +/ - 1% v2: +12v 16.7a 25a +/ - 5% +/ - 1% rl0402dx0324 v1: +3.3v 30a 40a +/ - 5% +/ - 1% v2: +24v 8.34a 12.5a +/ - 5% +/ - 1% rl0402dx0512 v1: +5v 30a 40a +/ - 5% +/ - 1% v2: +12v 16.7a 25a +/ - 5% +/ - 1% rl0402dx0524 v1: +5v 30a 40a +/ - 5% +/ - 1% v2: +24v 8.34a 12.5a +/ - 5% +/ - 1% rl0402dx1224 v1: +12v 16.7a 25a +/ - 5% +/ - 1% v2: +24v 8.33a 12.5a +/ - 5% +/ - 1% copy right ultra level tech co., ltd 2015, all right reserved. specifications subject to change without notice. ultra level tech co., ltd. we supply the power customers need iso9001 www.ultralevel.com.tw tel:+886 - 2 - 29180118 fax:+886 - 2 - 29181465 c b c b rtn v1 v2 v1 rtn v2 fan
i/o connector pin assignment: ac input connector(cn1): rl0402du series: mating molex part no. 09 - 50 - 3071 or equivalent (7 pin, 5 used) or howder terminal block (hd - 121 - 3p). rl0402de series: iec320 or equivalent snap - in mounting type or dinkle terminal block ( dt - 35 - a02w - 03 ). output connector (cn2): mating molex part no. 09 - 50 - 3161 (16 pins), or howder (hd - 121 - 6p) m3.5, 8 pins terminal block, 9.5mm center. output pin assignment: (see below table). logic signal connectors (cn3) : mating jst xhp - 5 or equivalent (chyao shiunn js - 2001 - 05). mating pins: jst sxh - 002t - p0.6 for awg 30 to 26. mounting inserts: 6 - 32, m4 4 places individually with maximum penetration 0.15 on bottom side and 0.25 on both side. v1 v2 rtn molex pins 1 - 6 pins 14 - 16 pins 7 - 13 howder pins 1 - 2 pins 6 pins 3 - 5 copy right ultra level tech co., ltd 2015, all right reserved. specifications subject to change without notice. rl0402de series (enclosed with built - in fan type): 9(l) x 5(w) x 1.6(h)inches; weight: 1.6kg. ultra level tech co., ltd. we supply the power customers need iso9001 www.ultralevel.com.tw tel:+886 - 2 - 29180118 fax:+886 - 2 - 29181465 b c b c c b c b b c c b b b c c l n v1 fan rtn v2 v2 rtn v1 mounting hole: b: 6-32 unc (zn-plated) 8 place c: m4x0.7 unc 8 place


▲Up To Search▲   

 
Price & Availability of RL0402DU-1224

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X